RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 134)

- 134 -
4. Next control – a field for entering expiry date of the minimum sample.
2 weeks before the expiry date the pictogram on minimum sample
status displayed in the mass measuring window section is
supplemented by a clock. It informs on the approaching expiry of the
minimum sample. Contact RADWAG representative to carry out
necessary changes in minimum sample settings.
5. Limits – option that enables entering data on the mass value of a
minimum sample and range of packaging mass (tare) with applicable
criteria:
Tare – maximum value of tare for which the minimum sample is valid.
the software enables entering three characteristic quantities: 0.000g,
optional mass from balance measuring range and Max balance
measuring range (see a below example).
Minimum mass – the value of minimum mass that is determined for
a balance in its place of use and using appropriate methods.
Example no. 1 a balance AS 220.3Y, d=0.0001 g:
This balance has the following values of minimum sample determined for the
following values of packaging mass.
No. Tare value Minimum
sample
Means of operation
1 0.0000 g 0.1000 g The minimum sample refers to all net
weighments that are weighed without a
packaging (the button is not
applied)
2 10.0000 g 1.0000 g The minimum sample refers to all net
weighments that are weighed in a
packaging that mass ranges from 0.0001 g
to 10.0000 g inclusive (the button
applied)
3 50.0000 g 2.5000 g The minimum sample refers to all net
weighments that are weighed in a
packaging that mass ranges from 10.0001
g to 50.0000 g inclusive (the
button applied)
4 200.0000 g 4.0000 g The minimum sample refers to all net
weighments that are weighed in a
packaging that mass ranges from 50.0001
g to 200.0000 g inclusive (the
button applied)
Example no. 2 a balance AS 220.3Y:
No. Tare value Minimum
sample
Means of operation
1 220.0000 g 0.5000 g The minimum sample refers to all net
weighments that are weighed in a
packaging with optional mass from full