RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 151)

- 151 -
Procedure:
•
Connect a transponder card scanner to a balance’s port (RS 232 COM1 or
RS 232 COM2), select communication port in balance settings for the
transponder card scanner
•
In submenu < Communication> set baud rate for compatible with the
one of the transponder card scanner (default 9600b/s).
•
Enter the database of operators and edit desired operator’s record, go to <
Card number> option,
•
On entering editing mode in < Card number> option, an editing window
is opened with an on-screen keyboard,
•
Approximate the card to the transponder card scanner. The balance
automatically displays number of detected card in the
field,
•
Accept recognized number by pressing key and returning to the main
window of weighing mode.
29.5. Additional display
The balance enables communicating with an additional display using the
following ports:
•
RS 232 (COM1),
•
RS 232 (COM2),
•
Tcp.
Type of data displayed on an additional display is declared in variable
(template)>.
Procedure – designing a variable
− Enter group of parameters < Peripheral devices>
− Press “ Additional display / Project” field, which opens an editing
window with an on-screen keyboard,
− Use the on-screen keyboard to insert desired value of a standard, or
− Select desired value of a standard using a list displayed on pressing <
> key
− Accept by pressing key.
Caution:
Balance 3Y series cooperates with an additional display WD5/3Y manufactured by
RADWAG.
Ensuring correct cooperation between the balance and the additional display, requires
that the parameter <
Standard> has a variable number set to value {140}, and
the baud rate value set to 38400 bits/s for a port having the additional display
plugged.
29.6. Ambient conditions module
A balance 3Y series enables connecting an ambient conditions module THB
series using ports COM 1 or COM 2.