RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 111

- 111 -
In order to preview detailed information on a sample, press field with its name.
The opened window contains the following data:
In case the following procedure is completed for a sample:
•
weighing A only, then tare value is <0>,
•
weighing T only, then value of weighing A is <0>
•
weighing T+A, then for tare and weighing A the mass values are assigned.
Data on a weighed sample can be printed on a connected printer on pressing a
pictogram with a printer on display’s upper bar.
In order to preview data on weighing A, press
In case in a given series there are samples for which weighing of initial mass
(Weighing A) is already completed, it is possible to carry out final weighing
(weighing B) for these samples.
Ważenie B
Select option:
On selecting the option, the balance moves to the first sample on the list,
for which weighing is not completed. If there are no such samples in a
series, the balance displays a message that such process is inaccessible. If
such process is possible, then new data on initiated process is displayed in
the grey coloured workspace.
Caution:
Description