Profile structure, Settings – RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 42

- 42 -
Deleting a profile
Procedure:
•
Enter balance’s main menu by pressing Setup key,
•
Enter submenu < Profiles>,
•
Press and hold an entry with profile name that should be deleted,
•
A menu is opened with a list. Select option
•
A message box is displayed which requires confirming profile’s deleting:
•
Accept the message box by pressing
key, the profile is deleted.
Caution
:
Deleting a profile is only enabled after logging in as an Administrator
.
14.2. Profile structure
Each profile contains the following entries:
Settings
This menu enables setting an individual profile’s name
(a sequence of alphanumeric characters), and declaring
a default working mode (the selected mode is activated as
default on profile selecting).
Working
modes
Contains the following submenu:
Additional setting of a working mode
Function keys
Displayed information
Printouts
Readout
Contains the following submenu:
Filter
Value release
Autozero
Autozero: Dosing
Last digit
Units
Menu enables declaring the start unit, the supplementary
unit, 2 custom units and entering the value of gravitational
acceleration force in balance’s operation place.
14.2.1. Settings
Name
On entering this option, the display opens a message box
with keyboard. Insert name of a profile and accept it by
pressing
key.
The name is assigned to the profile.
Default working mode
On entering this option the user can select a specific
working mode, which is set as default in a profile. In case
option
balance activates last used working mode.