RADWAG MYA 5.3Y.F1 Microbalance - Manual (Page 20)

- 20 -
10. WEIGHING
Load a weighed object on balance’s weighing pan. On stabilization of weighing
result, indicated by stability marker visible on the side of balance’s display,
read the measurement result.
Saving / printout of the measurement result is available on pressing
key:
• In case of verified balances – only stable measurement result can be
saved or printed (stability marker visible on balance’s display)
• In case of non-verified balances – stable or unstable measurement
result can be saved or printed (regardless of stability marker
presence). If unstable measurement result is printed then it is
accompanied by question mark <?> in front of printed mass value.
10.1. Selecting of measuring unit
Change of measuring unit is carried out by pressing the measuring unit icon
visible next to the value of measurement result on balance’s display. Pressing
the measuring unit icon opens a list with available units. On selecting one of
them, the software automatically calculates the indicated mass value to the
active measuring unit.
Available measuring units:
Unit Denotation
Verified
balance
gram [g] tak
miligram [mg] tak*
kilogram [kg] tak*
carat [ct] tak*
pound [lb] nie
ounce [oz] nie
ounce Troy [ozt] nie
pennyweight [dwt] nie
Taele Hong Kong [tlh] nie
Taele Singapore [tls] nie
Taele Taiwan [tlt] nie
Taele China [tlc] nie
Momme [mom] nie
Grain [gr] nie
Newton [N] nie
Tical [ti] nie