RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 77

- 77 -
Use of data contained in the header and footer.
Should data from header and/or footer be used, follow below procedure:
o
Press <
Print header> soft key before starting density determination
procedure,
o
Carry out density determination procedure
A report is printed automatically on completing the second
measurement (Weighing 2),
When density determination result is displayed, it is possible to print
it for numerous times by multiple pressing of <
PRINT > key,
o
Press <
Print footer > soft key after completing the density
determination procedure.
Caution:
Remember to select data to be printer in the header, footer and report. For details
see section “PRINTOUTS”.
This manual is related to the following products: