Balance cleaning, Pluging to mains, Connecting peripheral equipment – RADWAG MYA 5.3Y.F1 Microbalance User Manual
Page 11

- 11 -
2.1. Balance cleaning
1. Disassembly the weighing pan and portable elements. Use the most
gentle movements so as not to damage the mechanism. It is
recommended to use tweezers while removing the pan from
microbalances.
2. If possible, use vacuum keyboard cleaner to remove the dust from the
weighing chamber (especially recommended for microbalances)
3. Glass parts should be cleaned using a dry flannel cloth (mild cleanser
may be used if it does not contain any abrasive substances) – for draft
shield disassembly instruction go to the next section of this manual
4. Use a dry flannel cloth in order to clean disassembled parts (mild
cleanser may be used if it does not contain any abrasive substances)
Caution:
Cleaning balance’s weighing pan if installed may damage instrument’s measuring
mechanism.
Upon completing the cleaning process reassembly the balance elements. When
compared to disassembling process reverse order of actions must take place.
2.2. Pluging to mains
The balance should be plugged to mains using the original power adapter,
which is balance’s standard equipment. Plug the power adapter’s plug to
balance’s socket located at the back of the housing.
2.3. Connecting peripheral equipment
Use only accessories and peripheral equipment recommended by the
manufacturer of your balance. The balance must be disconnected from the
mains before connecting or disconnecting any peripherals (printer, PC
computer, computer keyboard). On connecting the peripherals, plug the
balance to mains.