Festo Кабели и принадлежности - Manual (Page 97)

A. Technical appendix
A−4
Festo P.BE−SPC200−SMX−1−EN en 0503b
A.2 Internal circuitry
Circuitry of control connection (AMPLIFIER, X30)
Circuitry of the outputs (+/− DIRECT, +/− PULSE,
+/− ENABLE, +/− F/H STEP):
+...
−...
SPC200 Stepping motor controller
Fig. A/1: Principle RS 485 / RS 422
Circuitry of the inputs (+/− READY):
+READY
−READY
SPC200 Stepping motor controller
(+ 24 V from
sensor plug)
Fig. A/2: Relay contact
On the connecting cable for the SEC−ST the input READY is
bridged.