Festo Кабели и принадлежности - Manual (Page 12)

Contents and general instructions
X
Festo P.BE−SPC200−SMX−1−EN en 0503b
Notes on the use of this manual
This manual contains basic general information on fitting,
installing and commissioning the SPC200, as well as a deĆ
scription of its method of operation as a stepping motor conĆ
troller. The manual deals with the SPC200 Smart Positioning
Controller with operating system version as from 4.6 and
fitted stepping motor indexer module with firmware version
as from 1.42 (see section 5.3, Status display) as well as
WinPISA as from version 4.3.
Manuals on the SPC200 Smart Positioning Controller
Type Title Contents
System manual SPC200 Smart Positioning Controller,
user manual
type P.BE−SPC200−... Installation, commissioning and
diagnosis with SPC200; standard
components and modules
Software manual WinPISA software package
type P.SW−WIN−PISA−.. Functions of the WinPISA software
package
Help system Help system for WinPISA (contained
in WinPISA) WinPISA help system
Manuals Field bus module
type P.BE−SPC200−COM−... Installation, commissioning and
diagnosis of the relevant field bus
module
Stepping motor indexer module
type P.BE−SPC200−SMX−1−... Installation, commissioning and
diagnosis with a stepping motor
Electric positioning system
type P.BE−ATP−... Further information on electric
positioning systems
Special information on commissioning, programming and
diagnosing the SPC200 with the WinPISA software package
can be found in the appropriate manual for WinPISA.