Festo Кабели и принадлежности - Manual (Page 7)

Contents and general instructions
V
Festo P.BE−SPC200−SMX−1−EN en 0503b
Designated use
The stepping motor indexer module type SPC200−SMX−1 has
been designed for coupling a suitable stepping motor conĆ
troller to the SPC200. With this stepping motor controller the
SPC200 can control a stepping motor axis. Maximum 3 stepĆ
ping motor indexer modules can be fitted in a rack.
Basic components and modules for the SPC200 are described
in the user manual type P.BE−SPC200−... . The safety instrucĆ
tions specified in the manuals must always be observed and
the relevant components and modules must only be used as
intended. Please observe also the safety instructions in the
operating instructions for the pneumatic components used.
The SPC200 and the modules and cables to be connected are
only to be used as follows:
ć As specified in industrial applications.
ć Without any modifications by the user.
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
ć iIn faultless technical condition.
When used together with commercially available compoĆ
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data, torques etc. must be observed.
National and local safety regulations must also be observed.