Festo Кабели и принадлежности - Manual (Page 68)

4. Commissioning
4−23
Festo P.BE−SPC200−SMX−1−EN en 0503b
4.3.6 Functional check of the stepping motor axes
When the axis and application parameters have been set,
check that the axes function correctly.
Preparations for the functional check:
S Check to see if the coupling between the motor and the
linear axis has been loosened. If this is not the case,
loosen the coupling.
S Leave the stepping motor controller switched off. If
necessary, switch this off.
S When the axis moves in accordance with the functions in
the dialogue window Commission stepping motor," it
moves in each case at the set reference speed.
If necessary, set a lower reference speed factor during the
functional check of the axes.
Proceed with the functional check as follows:
1. Select the command [Stepping motor] in the menu
[Online] [Commissioning] in active online mode. The
dialogue window Commission stepping motor" will be
displayed.