Festo Кабели и принадлежности - Manual (Page 67)

4. Commissioning
4−22
Festo P.BE−SPC200−SMX−1−EN en 0503b
4.3.4 Configuration of the settings for analogue reference value
specification
The settings for analogue reference value specification in the
register card Analogue reference value" are identical to the
settings for pneumatic axes.
Information on the settings can be found in the WinPISA
manual.
4.3.5 Loading the axis configuration into the SPC200
Providing the hardware configuration of the SPC200 correĆ
sponds to the project, you can load the configured values into
the SPC200 in the dialogue window Parameter set for the
..Ăaxis."
The online mode must be active for this purpose. If necessary,
close the dialogue window Parameter set for the .. axis" and
activate the online mode.
While the online mode is active, load the relevant data in the
individual register cards into the SPC200 with the button
Download."