Festo Кабели и принадлежности - Manual (Page 22)

1. System summary
1−8
Festo P.BE−SPC200−SMX−1−EN en 0503b
1.3 Drive packages
Festo offers drive packages for electric axes. These consist of:
ć stepping motor controller
ć stepping motor (in some cases with brake)
ć gears (if necessary).
The drive package must be suited to the requirements of the
positioning system (moveable mass, positioning time, etc.) as
well as to the electromechanical linear axis used.
A stepping motor controller with a 5 V signal level must be
used for operating the SPC200 (see Technical specificaĆ
tions").
1.3.1 Stepping motor controller
The stepping motor controller forms the link between the
SPC200 as positioning controller and a stepping motor.
The signals from the positioning controller are converted by
the stepping motor controller in accordance with the motor−
dependent and drive−dependent settings (e.g. phase current).