HID EntryProx Installation Guide - Manual (Page 9)

EntryProx™ User Guide Part No. 4045-905, Rev C.2
A
K
B
C
D
E
F
G
H
I
J
L
Figure 1 Factory Supplied Parts
3.2 INSTALLER SUPPLIED PARTS LIST
•
Appropriate DC power supply (10-15VDC, linear type)
•
Appropriate separate power supply for door locking unit.
• Appropriate
electrical tools
•
Recommended remote antenna cable ALPHA 1294C
(22AWG)
•
Wiegand interface cable ALPHA 1295C (22AWG) (only if
using a separate Wiegand access control panel)
•
Power supply cable (18AWG - 22AWG)
•
Door locking unit cable (18AWG - 22AWG)
•
Door monitor cable (18AWG - 22AWG)
•
Request to Exit cable (ALPHA 2421C 18AWG or ALPHA
1292C 22AWG) (only if using remote switch)
•
Optional tamper screw bit (only if tamper screw is used)
•
Ademco 945T or PR-20451 magnet and reed switch or
equivalent (for UL 294 compliance)
February 7, 2007 Page 9 of 58
© 2007 HID Global Corporation. All rights reserved.