HID EntryProx Installation Guide - Manual (Page 47)

EntryProx™ User Guide Part No. 4045-905, Rev C.2
5. When the list is complete, press * to exit program
mode.
Here is a description of the Report Layout:
Top line – Title
•
Second line
•
– Session Data
Column 1
•
– User location
Column 2
•
– user type (see table)
Column 3
•
– pin code
Column 4
•
– site code/card number
11 WIEGAND MODE
If you program the EntryProx unit to operate in Wiegand mode
with a separate access control panel, the following features are
not accessible:
•
The EntryProx unit does not control door lock or unlocking
operations.
•
The EntryProx unit is not able to store codes in memory.
•
The main and auxiliary relay functions are turned off.
•
The door monitor and Request to Exit inputs are disabled.
For more information on programming the EntryProx unit for
Wiegand operation, please contact your local distributor.
February 7, 2007 Page 47 of 58
© 2007 HID Global Corporation. All rights reserved.