HID EntryProx Installation Guide - Manual (Page 40)

Part No. 4045-905, Rev C.2 EntryProx
™
User Guide
•
Protocol – Printer
•
Timeout (Seconds) – 30
4. To download data from the EntryProx Unit to the Palm:
•
Touch Retrieve on the PDA screen
•
Place the Palm IR receiver within 1/2” of the
EntryProx IR LED (to the right of the yellow LED)
•
Enter the required command sequence at the
EntryProx keypad
You have 30 seconds to enter the command sequence
after entering the receive screen. If the data begins to
send before you press Retrieve, then you will miss the
beginning of the data.
5. Command sequences are described in detail in the
following sections.
Page 40 of 58 February 7, 2007
© 2007 HID Global Corporation. All rights reserved.