7 user types, 8 pin codes, cards and combinations – HID EntryProx Installation Guide User Manual

Page 29

EntryProx™ User Guide

Part No. 4045-905, Rev C.2

6.7 USER TYPES

User Types determine what happens when a user presents their
card/PIN to the reader. A User Location can be programmed as
one of four specific user types:

Toggle latch strike (0) For this user-type, when the Card is
presented (or PIN is entered) the door opens for an indefinite
period, until the card / code is reentered or another toggle code is
entered (this is useful for deliveries, for example).

Normal access (1) This is the default user type, when the Card is
presented (or PIN is entered) the door opens for the duration of
the Main Relay time.

Download Log (2) For this user-type, when the Card is presented
(or PIN is entered) the door remains locked and the Transaction
Log is “Downloaded” to an optional Palm PDA via the IR LED.
(There are three LEDs on the top of the unit - the IR LED is the
one on the right.) This code cannot be used to gain access
through the door.

Note The log is only downloaded and displayed, not erased.

Lockout (3) For this user-type, the keypad “freezes,” disallowing
all other codes, plus the door remains in the current state. During
a lockout state, card access does not continue to work. If it is
locked, it remains locked. If it is unlocked, it remains unlocked until
another Lockout code is entered, releasing it from Lockout mode.

Note: Reserve this user-type for a supervisor or override function.

6.8

PIN CODES, CARDS AND
COMBINATIONS

A User Location can be programmed with one of the four PIN
code/card combinations listed below using the programming
Commands in parentheses

(1) PIN Code ONLY (Command 50)

(2) PIN Code AND Card (Command 50 plus present card to

proximity reader)

(3) Card ONLY (Command 50 or Command 51)

(4) PIN Code OR Card (Command 52)

February 7, 2007

Page 29 of 58