HID EntryProx Installation Guide - Manual (Page 31)

EntryProx™ User Guide Part No. 4045-905, Rev C.2
Remember to write an entry in your user list:
“User:2 Type:1 PIN:1111 Card:0056 Name: John Doe “
7.2 QUICK PROGRAMMING EITHER PINS OR
CARDS
A “quick program” feature allows user data entry with minimal
keystrokes. No command number is required. This feature
programs either a card or a PIN, not a combination, and it
automatically selects a “Normal” user access type. Just enter the
user’s location and the PIN (or present card):
1. Place the EntryProx unit in program mode.
Press: 99 # Master Code *
2. On the EntryProx keypad, for Code Quick Enroll
Press: user location # PIN * PIN * OR for Card Quick
Enroll press: user location # **
3. Press * to exit program mode.
USER TYPES - REMINDER
0-Toggle 1-Normal 2-Download 3-Lockout
7.3 PROGRAMMING PIN CODE ONLY USE
To program PIN Code ONLY operation with Command 50, use the
following program sequence:
1. Place the EntryProx unit in program mode.
Press: 99 # Master Code *
2. On the EntryProx keypad
Press: 50 # user-type # user location # keypad PIN
* keypad PIN *
3. Press * to exit program mode.
February 7, 2007 Page 31 of 58
© 2007 HID Global Corporation. All rights reserved.