HID EntryProx Installation Guide - Manual (Page 7)

EntryProx™ User Guide Part No. 4045-905, Rev C.2
2.5 DEFAULT SETTINGS
The EntryProx unit is shipped with the following default settings.
PARAMETER DEFAULT SETTING
Master Code (User Location 1) 1234*
Code must be changed before programming the
unit.
Main Relay energizes for 5 seconds
Audible Keypress Feedback ON
Local Propped Door Sounder activates after 30 seconds
Local Forced Door Sounder activates
immediately for 10 seconds
Data Output Port Infrared (IR) port
February 7, 2007 Page 7 of 58
© 2007 HID Global Corporation. All rights reserved.