Allied Telesis AT-S25 - Manual (Page 91)

AT-S25 Version 1.4 User’s Guide
91
Clearing the
Static MAC
Address Table
To clear all addresses from the static MAC address for a switch in a stack,
perform the following procedure:
1. From the Main Menu, select the switch containing the static address
table to the cleared.
2. From the Main Menu, select MAC Address Table.
The MAC Address Table menu shown in Figure 35 is displayed.
3. Select Clear static MAC table.
4. Select Yes to confirm or No to cancel the procedure.
If you select Yes, all of the static address entries are deleted from
the switch.
5. Return to the Main Menu.