Allied Telesis AT-S25 - Manual (Page 65)

AT-S25 Version 1.4 User’s Guide
65
The Port Status window contains the following information:
Port
This column displays the number and name of each port. You can
assign names to the ports to make them easier to identify. For
instructions on assigning port names, refer to Configuring Port
Parameters on page 66.
The standard twenty four ports on an AT-8324 switch are
numbered 1 to 24, and the standard sixteen ports on an AT-8316F
switch are numbered 1 to 16.
Link
This column indicates whether there is an active connection
between a port and the device connected to the port. Offline
indicates that there is no link, while Online indicates that there is
a link. If a port is online, this column will also specify the operating
speed of the port.
Status
This column indicates whether a port is enabled or disabled. For
instructions on how to manually disable or enable a port, refer to
Configuring Port Parameters on page 66.
Mode
This column indicates the duplex mode of the ports. Possible
values are auto-negotiate, full-duplex, or half-duplex. For
instructions on how to manually set the duplex mode of a port,
refer to Configuring Port Parameters on page 66.
The web-based Omega interface features a Refresh button at the
bottom of the window. You can use the button to query the
switch for the latest port status and displays the status on the
screen.
3. Return to the Main Menu.