Allied Telesis AT-S25 - Manual (Page 102)

102
8. Select Update this VLAN.
The VLAN titled Sales has now been created in the stack. The new
VLAN consists of ports 1 through 7 on the master switch.
9. Return to the Main Menu.
10. From the Main Menu, select the slave switch (stack ID 2).
11. From the Main Menu, select Virtual LAN/QoS.
12. From the Virtual LAN/QoS window, select the Sales VLAN.
The VLAN Configuration window for the Sales VLAN is displayed.
13. In the All Ports on VLAN field, enter the following. Press .
1-4, 8
Ports 1 to 4 and port 8 on the slave switch will be untagged ports
of the Sales VLAN.
Since there will not be any tagged ports in this VLAN, the Tagged
Ports in VLAN field is left empty.
14. Select Update this VLAN.
15. Return to the Main Menu.
The Sales VLAN now exists in the AT-8300 stack. It contains ports
from both the master switch and the slave switch.