Allied Telesis AT-S25 - Manual (Page 51)

AT-S25 Version 1.4 User’s Guide
51
Resetting a Stack
You might occasionally need to reset the stack. For example, you might
need to reset a stack to fix an error condition, to download software
through a modem, or to reset all statistics counters to 0 (zero).
You can reset a stack three ways:
❑ Pressing the Reset button on the front panel of the switches.
❑ Using Omega’s Reset and restart option. This option enables you
to perform a software reset from a local terminal, a remote
location via Telnet, or a web browser.
❑ Unplugging the power cords from the power source and
plugging them back in to recycle power and reset the switches.
Note
If you reset a stack using the Reset buttons or by unplugging the
power cords, you must reset the slave switches first, preferably
starting with the slave switch with the highest switch ID, and then
the master switch. You cannot reset an individual switch in a stack.
You must reset the entire stack.
Note
The following procedure resets the entire stack. You cannot reset
one switch in a stack.
To reset a stack using the Omega interface, perform the following
procedure:
1. From the Main Menu, select the master switch.
Note
You must select the master switch to perform this procedure. Do not
select a slave switch.