Allied Telesis AT-S25 - Manual (Page 37)

37
Chapter 2
Managing a Stack
The procedures in this chapter show you how to activate and configure
many of an AT-8300 stack’s parameters. The procedures are as follows:
❑ Configuring IP Parameters on page 38
❑ Configuring Spanning Tree Protocol Parameters on page 43
❑ Enabling or Disabling IGMP Snooping on page 49
❑ Naming a Stack on page 50
❑ Running Diagnostics on page 58
❑ Resetting a Stack on page 51
❑ Configuring the RS232 Port on the Master Switch on page 55
❑ Reactivating the Default Settings on a Stack on page 53
❑ Pinging a Device on page 61
❑ Displaying the Activity Monitor on page 60