Allied Telesis AT-S25 - Manual (Page 100)

100
Figure 50 VLAN Configuration Window
5. Select the VLAN Name field and enter a name for the new VLAN (for
example, Marketing). Press .
After entering the name for the new VLAN, the VLAN ID number
automatically increments to the next available number. For
example, if this is the first VLAN that you are adding to the stack,
the VID number increments to 2.
6. If desired, select the ID field and change the VLAN ID number. Press
. For the range of this parameter, refer to VLAN Identifier
on page 141
Note
Allied Telesyn highly recommends that you use the VLAN ID
(default) supplied by the system. Although you can change VLAN
IDs to suit your specific needs, changing them requires a more
advanced understanding of VLAN tagging.
7. Select the In the All Ports on VLAN field and specify the ports (both
tagged and untagged) on the currently selected switch that are to be
members of this new VLAN. Press .