Allied Telesis AT-S25 - Manual (Page 66)

66
Configuring Port Parameters
This section contains the procedure for configuring the parameters for
the individual ports on a switch.
To view and configure the parameter settings for a port on a switch,
perform the following procedure:
1. From the Main Menu, select the switch in the stack with the port to be
configured.
2. From the Main Menu, select Port Status and Configuration.
The Port Status window in Figure 22 on page 64 is displayed.
3. Select the port to be configured.
The Port Configuration window in Figure 23 is displayed.
Figure 23 Port Configuration Window