Allied Telesis AT-S25 - Manual (Page 58)

58
Running Diagnostics
The Omega interface has an option for running diagnostic self-tests on
the switches in a stack. The program reports on the operating status of
the following switch components:
❑ Flash PROM
❑ RAM
❑ Serial Interface
❑ Power supply
❑ Operating temperature
The tests also display the following information:
❑ AT-S25 version number
❑ Stack MAC address
❑ Running time
Note
Running the diagnostic tests will not disrupt the network operations
of a switch.
To run the self-diagnostics program on a switch in a stack, perform the
following procedure:
1. From the Main Menu, select the master or slave switch on which to
run the diagnostic tests.
2. From the Main Menu, select Administration.
3. From the Administration menu, select Diagnostics.