Allied Telesis AT-S25 - Manual (Page 77)

AT-S25 Version 1.4 User’s Guide
77
3. Select Enabled.
The prompts in Figure 31 are displayed.
Figure 31 Source and Destination Port Mirror Prompts
4. Select Source Module.
A window is displayed listing the switches in the stack.
5. Select the switch containing the port to be monitored.
6. Select Source Port.
A window is displayed listing the ports on the switch.
7. Select the port to be monitored.
8. Select Destination Module.
A window is displayed listing the switches in the stack.
9. Select the switch that has the port where the network analyzer will be
connected.
10. Select Destination Port.
A window is displayed listing the ports on the switch.
11. Select the port where the network analyzer will be connected.
The prompts should now be showing the source and destination
switches and ports. Figure 32 is an example.
Figure 32 Example of Source and Destination Port Mirror Prompts
The two ports are now configured for port mirroring.
12. Return to the Main Menu.
13. Connect a device, such as a network analyzer, to the destination port
or use a remote monitoring program to view the mirrored traffic.