Allied Telesis AT-S25 - Manual (Page 119)

AT-S25 Version 1.4 User’s Guide
119
Table 6 defines the statistics.
4. To view statistics for a particular port, do either of the following:
a. Select Individual port overview and then a port. The frames
statistics for the selected port are displayed.
b. Select a frame type from the graph transmit Frames window. The
statistics for the selected frame type for all of the ports is
displayed.
5. To clear the graph, select Zero all statistics counters on the entire
system.
6. Return to the Main Menu.
Table 6 Transmit Frames
Frame Type Description
Total good transmits Total frames transmitted by the switch without errors since the last
reset.
Broadcasts Frames forwarded by the switch destined for ALL nodes on the
network, excluding multicast frames.
Multicasts Frames forwarded by the switch destined for multiple but specific
addresses, excluding broadcast frames.
Single collision Frames from two ports that collided because they were sent at the
same time; considered normal.
Late collisions Collisions that occur after 64-byte times of the frame had elapsed.