Ag Leader ParaDyme Operation Guide - Manual (Page 58)

56 Ag Leader Integra and Versa Firmware Version 4.3 / Edge Firmware Version 5.1
Change Carrier
The ParaDyme system automatically selects the best carrier based on signal strength. However, you
may want to manually select a cell carrier for optimum coverage in a particular location.
Note: Selecting another carrier could result in roaming charges on your cell bill.
To change your carrier:
1. From the AutoSteer Setup screen, press the
Connections button. The Connections menu appears.
2. Press the Cell Modem button. The Cell Modem
screen appears.
3. Your status and signal strength are displayed at the
top of the window. Press the Change Carrier button.
The Change Carrier screen appears.
4. The Change Carrier screen displays the list of
available carries. Select a new carrier from the list, or
select Automatic to let ParaDyme make the selection.
Next, press the check mark button. Your selection is
made and the Cell Modem screen reappears.
Note: It can take up to several minutes to detect and display all of the available carriers.
Advanced Debug
The Advanced Debug screen displays information to help your dealer or authorized technician
troubleshoot problems connecting your cell modem.To view or save advanced debug information:
1. From the AutoSteer Setup screen, press the
Connections button. The Connections menu appears.
2. Press the Cell Modem button. The Cell Modem
screen appears.
3. Press the Advanced Debug button. The Advanced
Debug screen appears.