Ag Leader ParaDyme Operation Guide - Manual (Page 57)

55
• provide Internet connectivity.
• enable remote diagnostics and troubleshooting.
Cell Modem Screens (Factory-supplied SIM)
The Cell Modem screen enables you to view information about your cell modem connection and manage
your Preferred Roaming List.
To access the status and signal strength of the Cell modem connection:
1. From the AutoSteer Setup screen, press the
Connections button. The Connections menu appears.
2. Press the Cell Modem button. The Cell Modem
screen appears. The information displayed on the Cell
Modem screen depends on which cell modem is
installed on your ParaDyme system. For systems
configured for the United States, see next step. For
systems configured for Europe and Australia, see Step
4.
3. ParaDyme systems configured for the United States
display cell modem connection status and enable you
to select Alternative PRLs. If your signal strength is low,
press the Manage PRL button.
• Set connection priority to one of the other cell carries
available in your area (which might have a better signal),
by selecting one of the Alternative PRLs and then pressing
the check mark button.
4. ParaDyme systems configured for Australia and
Europe display cell modem connection status and your
individual International Mobile Subscriber Identity
(IMSI).
Cell Modem Screens (Customer-supplied SIM)
The Cell Modem screen enables you to:
• configure your SIM.
• change your cell carrier.
• view information about your cell modem connection.
• view advanced Debug information for troubleshooting purposes.
• manage your Preferred Roaming List.