Ag Leader ParaDyme Operation Guide User Manual

Page 21

Note:

Fore – indicates the antenna is located in front of the vehicle’s control point.

Aft – indicates the antenna is located behind the vehicle’s control point.

Note:

The Control Point of a vehicle is defined as:

• Standard Wheeled Vehicle – Rear Axle
• Track Vehicle – Center of tracks
• Articulated Tractor – Pivot point of vehicle
• Combine/Swather – Front Axle

Note:

Ensure you select the appropriate offset for your configuration by selecting the Fore or Aft

button.

5. Enter the Antenna Lateral Offset value using the
numeric keypad and then select the Left Arrow or Right
Arrow button as applicable to your installation.

Note:

The Left Arrow and Right Arrow buttons define the antenna position (center of Roof Module)

relative to the vehicle center line when viewed from the vehicle rear. Select the appropriate offset for

your configuration. Press the Right Arrow button to proceed to the next Edit Vehicle step after you

have entered your antenna offset.

6. The Antenna Height screen appears. Enter the
Antenna Height value using the numeric keypad and
then press the check mark button.

Note:

Antenna height is measured from the antenna ground plane bottom to the ground surface.