Changing the aflink radio frequency – Ag Leader ParaDyme Operation Guide User Manual

Page 42

Ag Leader Integra and Versa Firmware Version 4.3 / Edge Firmware Version 5.1

2. Enter the radio channel using the keypad and press
the check mark button. The GPS RTK menu appears.

Note:

Ensure the vehicle radio channel is the same as the Base Station channel.

To use a previous channel:

1. From the Channel screen, press the Use Previous
button. The previously used channels list appears.
2. Select a channel using the up and down arrows and
press the check mark button to return to the RTK Radio
screen.

Changing the AFLink Radio Frequency

To change the AFlink radio frequency:

1. Obtain the radio frequency number assigned to your
Base Station and select the Frequency item from the
scrolling list.

Next, press the Change Frequency button. The Enter
frequency screen appears.

2. Enter the radio frequency using the keypad and
press the check mark button to return to the RTK menu.

Note:

Your Base Station frequency number is displayed on the Base Station receiver side.

Note:

The items in the right hand list change depending on what kind of radio you have installed.