Ag Leader ParaDyme Operation Guide - Manual (Page 47)

45
• The selection of XP or HP in your receiver is determined by the subscription sent to a receiver when it is
activated for OmniSTAR.
OmniSTAR Options
To get to the OmniSTAR screen:
1. Press the OmniSTAR button from the GPS menu.
The OmniSTAR screen appears.
2. There are three OmniSTAR options available. Refer
to the following sections for details.
General
The General screen displays information about your
OmniSTAR subscription.
Accuracy
The Accuracy screen displays two buttons enabling
you to choose the accuracy level you want to use with
your OmniSTAR. The higher the initial accuracy
requirement, the longer you have to wait to get a valid
position. Choosing Fast Startup indicates that the
operation you’re performing does not require high
accuracy and you just want to get autosteering as soon
as you have a valid position. Choosing High Accuracy
indicates that you are willing to wait for better accuracy
before getting a valid position.
Note: If you choose Fast Startup, this only affects the accuracy at initial startup; eventually, the
accuracy improves to the highest accuracy enabled by your current subscription type.
• For OmniSTAR XP, Fast Startup = 40 inches and High Accuracy = 9 inches.
• For OmniSTAR HP, Fast Startup = 40 inches and High Accuracy = 6 inches.