Ag Leader ParaDyme Operation Guide - Manual (Page 17)

15
To create a vehicle after first time use of the system:
Note: The following procedure uses a common vehicle type, but the actual steps and images
displayed on your screen will vary according to the type of vehicle you selected.
1. From the Vehicle menu, press the Setup Wizard
button. The Vehicle Type list appears.
2. Using the up and down arrows, select the
appropriate vehicle type and press the Right Arrow
button. The Vehicle Make list appears.
Note: The list of vehicle types available on your system may not match those shown here. If your
vehicle is not on the list, pick the vehicle closest to your vehicle type or choose the generic option.
3. Use the up and down arrows to select your vehicle
make and press the Right Arrow button. The Vehicle
Model list appears.
4. Use the up and down arrows to select your vehicle
model and press the Right Arrow button. The Vehicle
Controller Type list appears.
5. Use the up and down arrows to select your vehicle
controller type and press the Right Arrow button. The
Vehicle Name screen appears.
Note: OT2 is an acronym for the OnTrac2 control system. If you are using an OnTrac2 controller the
screens and options will be slightly different.