Ag Leader ParaDyme Operation Guide - Manual (Page 39)

37
9. Press the Open button.
10. Press the Upgrade button to start the
software upgrade. The upgrade uploading
process begins.
11. The upgrade process goes through a
series of steps and reboots the ParaDyme
system after a successful upgrade.
12. The ParaDyme system reboots after
the software upgrade is complete.
Note: The WiFi connection is closed when the ParaDyme system reboots.
13. The ParaDyme system is now ready for normal operation.
U
SING THE
GPS M
ENU
O
VERVIEW
The GPS menu enables you to monitor and set GPS
parameters and perform tasks to optimize your
AutoSteer system performance. The GPS menu
features the following functions:
• RTK enables you to set all the RTK radio settings.
• OmniSTAR enables you to view information about your
OmniSTAR subscription (optional for the ParaDyme
system), to select startup accuracy and to select a channel
according to your geographical location.
• WAAS enables you to select the Primary PRN and
Alternate PRN for your WAAS configuration.
• Precision Settings enables you to set a Flex mode for autosteering.
• NTRIP enables you to connect to NTRIP based GPS correction sources (RTK, OmniSTAR, WAAS) via a
cell modem.
• Planning Tool is informational only. It gives access to information enabling you to make decisions about
farming applications based on GPS status and quality.
• GPS Diagnostics is informational only. It provides access to information about the performance of the GPS
system.
• NMEA Out enables you to use the ParaDyme system GPS signals with other 3rd party precision
agriculture applications.