HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 80)

http://www.hp.com/go/clj9500mfp
64 Chapter 4 – Faxing Rev. 1.0
Setting or verifying the date and time
The date and time setting for the fax is the same value as the MFP date and time setting. If you are turning on the MFP for
the first time, you will be prompted for this information.
To verify or change the date and time settings
1 Press the M ENU button.
2 Scroll to and touch F AX .
3 Scroll to and touch F AX S ETUP R EQUIRED .
4 Scroll to and touch D ATE /T IME .
5 Select the date and time formats, and then type the date and time.
Setting or verifying the location
The location setting identifies the country/region where the MFP is located. This setting selects the date/time format and
the minimum and maximum rings-to-answer range for the country/region. Because this setting is a legal requirement in
some countries/regions, it must be set before the fax can operate. If you are turning on the MFP for the first time, you will be
prompted for this information.