HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 219)

ENWW Managing supplies 203
1
8
Replacing the image transfer kit
Use this procedure to install the image transfer kit.
Note
Remove your jewelry, which can snag on parts inside the MFP.
1 Replace the image transfer kit when REPLACE TRANSFER KIT appears on
the control-panel display.
2 If tray 1 is open, remove any paper that is loaded in the tray, and then close
the tray.
3 Open the front doors of the MFP, and then swing the large green lever
down.
2
3
1