HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 172)

http://www.hp.com/go/clj9500mfp
156 Chapter 6 – Control panel menus Rev. 1.0
AUTO CONTINUE *ON
OFF Determine how the MFP reacts to errors.
ON : If an error prevents printing, the message appears and the MFP
goes offline for 10 seconds before returning online.
OFF : If an error prevents printing, the message continues to appear
and the MFP does not print until C ONTINUE is touched.
Note
To stop printing when the MFP is out of staples, set AUTO
CONTINUE=OFF on the control-panel System setup menu.
SUPPLIES LOW CONTINUE
STOP Use this item to determine how the MFP functions when toner is
low. The
CARTRIDGE LOW message appears when the print cartridge
is almost out of toner. (After the message appears, about 2,400
pages can still be printed at 5% coverage.)
CONTINUE : The MFP continues to print while the CARTRIDGE LOW
message appears.
STOP : The MFP goes offline and wait for further action.
COLOR SUPPLY OUT *STOP
AUTOCONTINUE
BLACK Use this item to set the MFP behavior when a color supply runs
out.
Item Values Explanation