HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 152)

http://www.hp.com/go/clj9500mfp
136 Chapter 6 – Control panel menus Rev. 1.0
STAPLES Values vary
depending on the
finishing device
that is attached If stapling is requested, use this item to indicate where the staple is
placed and how many staples are placed.
If a stacker or 8-bin mailbox is attached to the MFP, stapling is not
an option.
If a stapler/stacker is attached, you can select the following values:
*NONE
ONE
(upper-left corner)
CORNER (upper-left corner)
TWO
THREE
SIX
CUSTOM
(available only if the stapler/stacker has a definition for
“custom”)
OPPOSITE CORNER
Note
Because of media size, media orientation, and media feed direction,
you should experiment with staple options to find the results you
want.
If a multifunction finisher is attached, you can select the following
values:
*NONE
ONE
TWO
SADDLE STITCH
Item Values Explanation