HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 32)

http://www.hp.com/go/clj9500mfp
16 Chapter 1 – MFP basics Rev. 1.0
4 Load (orient) the media according to size.
CAUTION
Do not load more media than the maximum that is indicated by the media-fill
triangles at the back of the tray.
5 Set the custom/standard switch to Standard.
6 Slide the tray into the MFP.
7 Look at the control panel within a few seconds of closing the tray. (Open
and close the tray if the time has already elapsed.) The control panel
displays the tray size and type configuration. Do one of the following.
• If the size and type settings are correct, touch E XIT to accept the settings.
• If the size and type settings are not correct, touch O K . The TRAY N
SIZE=* menu is displayed.
8 To change the size setting, touch the correct paper size. The message
SETTING SAVED is displayed for a moment, and then the tray type menu is
displayed.
4
5
6