HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 228)

http://www.hp.com/go/clj9500mfp
212 Chapter 8 – Managing and maintaining Rev. 1.0
28 If NEW TRANSFER KIT appears on the control-panel display, use the Up
arrow or the Down arrow to scroll to YES , and then touch O K . The kit life-
count is automatically reset.
29 If NEW TRANSFER KIT does not appear, press the M ENU button to open the
menus. Use the Up arrow or the Down arrow to scroll to CONFIGURE DEVICE ,
to RESETS , and then to RESET SUPPLIES . Scroll to NEW TRANSFER KIT , and
then select Y ES to reset the count.
Note
If you select NO or do not make a selection, the MFP remains offline until
you replace the kit and select YES .
30 Place the used parts in the packaging from the new ones. For recycling
information, see the recycling guide that is included with the new image
transfer kit.
30
28