HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 277)

ENWW Clearing jams 261
1
9
Clearing jams from the output areas
Jam in the fuser area at the lower left door
Follow these directions to clear jams at the lower left door (fuser area).
1 Move the finishing device away from the MFP to gain access to the lower
left door. To do this, stand on the left side of the MFP and pull the finishing
device straight toward you.
2 Open the upper left door.
3 If the jammed media is visible, remove it from the MFP. Then close the
upper left door and continue printing. If the jammed media is not visible, go
to step 4.
2
3
1