HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 224)

http://www.hp.com/go/clj9500mfp
208 Chapter 8 – Managing and maintaining Rev. 1.0
16 Remove the new filter from its packaging and insert the filter into the slot.
Note
Do not print without a filter installed.
17 Remove the new tray rollers from their packaging. Avoid touching the
rubber surface of the rollers.
Note
Replace all of the rollers in a tray at the same time.
18 Pull tray 2 out of the MFP until it stops. Lift it up slightly and pull it out.
Remove tray 3, noting which tray belongs in which position.
Note
Do not move the blue switch at the left rear of the tray. It is not necessary to
unload the paper from the tray.
16
17
18