HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 125)

ENWW Customizing tray 1 operation 109
Printing
5
Customizing tray 1 operation
This chapter contains information about printing tasks that are performed at the MFP’s control panel. See the User
Reference Guide on the CD-ROM for information about the printer drivers and printing software programs.
Customize tray 1 to fit your printing needs by selecting one of these options:
• Any time the tray has media loaded in it. If TRAY 1 SIZE=ANY SIZE and TRAY 1 TYPE=ANY TYPE (formerly known as
First mode), the printer prints from tray 1 regardless of the media size or type that is set in the software program.
Print speed might be slower than normal if the tray is configured for a specific paper size.
• Only when the type of paper loaded in tray 1 is specifically requested. If TRAY 1 SIZE= a size other than ANY SIZE or
TRAY 1 TYPE= a type other than ANY TYPE (formerly known as Cassette mode), the printer prints from tray 1 only if
the specified size or type of media in tray 1 is set in the software program.
Printing from tray 1 when the loaded paper is requested
When TRAY 1 SIZE= any size except ANY SIZE and TRAY 1 TYPE= anything except ANY TYPE , the printer treats tray 1 like
tray 2, tray 3, or the 2,000-sheet side input tray (tray 4). Instead of looking for media in tray 1 first, the printer pulls paper
starting with the tray that matches the type or size setting that is selected in the software program. Set the type and size for
a tray in the printer driver.