HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 230)

http://www.hp.com/go/clj9500mfp
214 Chapter 8 – Managing and maintaining Rev. 1.0
Replacing the image cleaning kit
Use this procedure to install the image cleaning kit.
1 Replace the cleaning kit when REPLACE CLEANING KIT appears on the
control-panel display. The gauge for the used cleaning kit blinks.
2 Remove the new parts from the packaging and save the packaging. If a
finishing device is installed on the left side of the MFP, pull it away from the
MFP.
3 On the left side of the MFP, use the blue tab on the rear edge of the MFP to
pull the filter out of the slot.
2
3
1