HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 58)

http://www.hp.com/go/clj9500mfp
42 Chapter 2 – Copying Rev. 1.0
Copying from the scanner glass
Use the scanner glass to copy small, lightweight (less than 46 g/m² or 12 lb), or irregularly sized originals, such as receipts,
newspaper clippings, photographs, or old or worn documents. The scanner glass is also used to copy books, magazines,
and manuals.
1 Place the document face-down on the scanner glass.
2 Make any image modifications, and choose any copy settings, if necessary. See “Copying by using user-defined
settings” on page 37 for the available settings.
3 If you are making only one copy, press S TART . If you are making multiple copies, use the numeric keypad to select
the number of copies (up to 999), and then press S TART to begin copying.
Copying by using the ADF
Using the ADF, you can make as many as 999 copies of a document that has as many as 100 pages (depending on the
thickness of the pages).
1 Load the document face-down into the ADF. The MFP can automatically detect several standard paper sizes.
2 Make any image modifications, and select any copy settings if necessary. See “Copying by using user-defined
settings” on page 37 for the available settings.
If you are making only one copy, press S TART . If you are making multiple copies, use the numeric keypad to specify the
required number of copies, and then press S TART .