HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 27)

ENWW Loading input trays 11
1
1
To load media in tray 1
Tray 1 is a multipurpose tray that holds a stack of media up to 5 mm (0.2 inch)
in height, which equals approximately 100 sheets of 75 g/m² (20-lb paper), 10
envelopes, or 20 transparencies. If media is loaded in tray 1, the MFP default
is to print media from tray 1 first.
Tray 1 provides a convenient way to print envelopes, transparencies, custom-
size paper, or other types of media without having to unload the other trays. It
can also be used as a convenient additional input tray.
Use this procedure to load media in tray 1.
1 Open tray 1.
2 Pull the first tray extension out until it stops. If you are printing on large
media, also extend the second tray extension out until it stops.
3 Load (orient) media according to size and finishing options. For single-sided
printing on preprinted paper, load the side to be printed on face up. For
double-sided printing (duplexing) on preprinted paper, load the first side to
be printed on face down.
1
2
3