HP Color LaserJet 9500 Multifunction Printer series - Manual (Page 163)

ENWW Configure device menu 147
1
6
Print quality submenu
Some items in this menu are available from a software program or from the driver (if the appropriate driver is installed).
Driver and software program settings override control-panel settings. For more information, see the User Reference Guide
on the CD-ROM.
Note When a value is specified with an ( * ), that value is the factory (default) setting.
Item Values Explanation
ADJUST COLOR HIGHLIGHTS
MIDTONES
SHADOWS
RESTORE COLOR VALUES Use this item to modify half-tone settings for each color density
(cyan, magenta, yellow, and black). The color density value
range is -5 to +5. Negative adjustments lighten the tone curve
and positive adjustments darken the tone curve. The factory
(default) setting is 0.
SET REGISTRATION PRINT TEST PAGE
SOURCE
ADJUST TRAY 1
ADJUST TRAY 2
ADJUST TRAY 3
ADJUST TRAY 4 Shift the margin alignment to center the image on the page
from top to bottom, and left to right. You can also align the
image on the front with the image that is printed on the back.
Additional instructions are printed on the test page when the
source is selected and
PRINT TEST PAGE is selected.