4 troubleshooting cmf problems – HP Insight Control Software for Linux User Manual
Page 221
Init: Unable to read server certificate from file /var/log/httpd/error_log
To create a self-signed certificate, see
.
25.4 Troubleshooting CMF problems
The following table describes possible causes of problems with the Console Management Facility
(
) and provides actions to correct them.
Corrective actions
Cause/Symptom
Perform the following actions:
•
Verify that the cmfd daemon is running on the CMS:
# /etc/init.d/cmfd status
Restart it as follows if it is stopped:
# /etc/init.d/cmfd restart
•
Examine the /opt/hptc/cmf/logs/cmfd.log for
errors.
•
Verify cmfd -h for the usage and default startup
parameters.
The CMF is not running
Perform the appropriate action:
•
Verify the BIOS configuration.
•
Verify that the management processor user name and
password were not changed.
•
Verify the management processor's IP address.
The CMF retries failed connections periodically
Perform the appropriate action:
•
Run the following command to check the connection
status:
# cmfmgr -s `headnode` console
•
Send a test message to /dev/console on the
managed system, then examine the log for that
message.
# pdsh -w server 'echo "Hello, world" >
/dev/console'
# ls -l
/hptc_cluster/adm/logs/cmf.dated/current/
Faulty or no connection
Determine if another connection to the VSP exists.
•
Stop the cmfd daemon, then use the ssh or telnet
command to connect to the management processor.
After logging in, enter vsp to access the VSP. If a
Console is not accessible error
message
occurs, it might be that someone else already has a
console connection.
•
Ensure that you can log into the management processor
to verify the IP address, the user name, and the
password are correct. Use either the telnet or ssh
command with the IP address of the management
processor as its argument.
•
In an extreme case, power off the managed system to
reset the management processor.
Connection is blocked
The management processor allows only one connection
at a time to the virtual serial port (VSP)
This is not related to the CMF. Do not use function keys.
Function keys do not work with some terminal
emulators
25.4 Troubleshooting CMF problems
221